I don’t really like my “third-hand” tool so I decided to build a better one using flexible ball-jointed coolant spraying pipe hoses. It’s not a totally new idea, SparkFun even sells some of these parts as a kit. But my way is slightly better, and I got the hoses from eBay (look for “Flexible Water Oil Coolant Pipe Hose for Lathe CNC”) instead because SparkFun’s prices were excessively expensive.
thanks for the information …still new in this field..may God bless you..
Amazon seems to have the flexible pipes too: http://www.amazon.com/Plastic-Flexible-Direction-Hydraulic-Machinery/dp/B008EGSLOO
Brilliant idea to make your own joints! Been looking for this idea for a while!
I have a suggestion for making the joints easier to use. As is, they usually are either tight or completely loose. I propose putting in a split washer to give yourself a better range of tightness when adjusting. If tightened almost all the way, but not quite, you can just move them and they will stay without the need to re-tighten.
I don’t have what I need to make my own threads.. So, instead, I found that if you remove the orange screw-in part of the hose completely and toss it, you can then remove the lowest blue segment and screw it directly into your base. Choose a screw (or bolt) with a head that is a bit larger that the hole in the bulb end of the segment. Not too big, otherwise when you snap the rest of the hose back onto this bulb, it won’t fit well. I can’t believe how simple this solution is! I’d seen so many of these tutorials and everyone was always having to come up with solutions for those damn threads — Never again!
Wow. It is very impressing review improved third hand using coolant hose. I read you blog and enjoy it. Thanks
I ran into the need for a third hand while installing a new stereo in my car. The problem was how to hold the new stereo in place while I installed the mounting brackets. I couldn’t find anything that would fit in the space above the stereo. I ended up using a section of coolant hose as a sort of “third hand”.
I put one end of the coolant hose on the metal part of the existing stereo bracket and put the other end on the metal part of the new stereo bracket. The coolant hose was just the right size to hold the new stereo in place in the car. I was able to install the mounting brackets for the new stereo without having to ask for help.
The coolant hose made a great “third hand”. It held the new stereo in place while I installed the mounting brackets. The coolant hose was just the right size to fit in the space above the stereo.
This is a great tip for anyone who is installing a new stereo in their car. The coolant hose is a great way to hold the new stereo in place while you install the mounting brackets.